Wednesday, November 23, 2011

Hot Deals Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included Overview

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included
(180)

Features and Benefits * NIMH High Power 14.4V 3800mAh rechargeable battery * 70 oC thermistor installed in the battery pack. Power will be cutt off if battery temperature beyond 70oC during charging to prevent from over charge. * 6" length wires is pre-installed for easy installation. * The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery. - To replace inside battery you need to take off 4 screws on the case then put new battery with solid connection. - Please make sure polarity of battery pack. Red wire is always connect to positive * TECHNICAL SPECIFICATIONS: - Votlage: 14.4V made of 12 pcs High quality NiMH sub C cells. and packed by 2x6 configuration - Capacity: 3800mAh - Max. Discharging rate : 10 C at 33 A - Dimension: 136 mm L x 45 mm W x 45 mm H. - Weight: 38.5 Oz. * Battery Installation Instruction: Step 1: Loose up all srews on the top cover of the Roomba Advanced Power System. Tool: You need a triangle screw driver to do so. Step 2: Open and remove the top cover from the power system which may be glued. Tool: You may need a flat screw driver to open it carfuelly Step 3: Remove the old battery inside. Three are wires with metal contact connected inside. You can remove the wires by pulling up the contat or cut wires off. Take a note of the wire connections Step 4: Put new battery into the battery case and solder three wire back to metal contacts. Follow the note taken in Step 3 or the following details for re-wire: - Red wire : battery positive - The red wire must go to the terminal farthest away from the battery - Black wire: battery negative - metal contact near edge - White wire: temp sensore - metal contact on other side Step 5: Put back the cover Step 6: Screws on the cover Read more Details.

Specification :
  • Compatible with all Roomba FloorVac models.
  • Up to 120 minutes run-time
  • The battery is designed for exactly replacing inside battery pack for IRobot Vacuum cleaner. e.g Roomba APS 4905 battery.
  • Can be recharged up to 1000 cycles.
  • To replace inside battery you need to take off 4 screws on the case then put new battery with solid connection. Screwdriver is included

Tenergy Model 91049

Old Price :   In Stock
Your Price: Check Special Offers !!!Lowest Price
Free Shipping
Ships in 1-2 business days
See more Details & Compare Prices


Buy Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included

Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included
List price : Cheapest Price
Read Customer review and Compare price of all dealers for Tenergy 14.4V 3800mAh NiMH Battery Pack for IRobot Vacuum Cleaner 400 series such as Roomba 4905 --New!! A Screwdriver included
Usually ships in 1-2 business days

You may be interested...

                     


### Product Information and Prices Stored : Nov 23, 2011 20:55:30 ###
If this Information is Not Updated, Please Check!!!

Drinking Water Coolers

No comments:

Post a Comment